Structural Insulated Panels
ResCom SIP’s are a revolutionary building system that consists of a solid core of expanded polystyrene (EPS) structurally laminated to 2 oriented strand board (OSB) skins.
The panels include framing, insulation, wire conduits, and sheathing in a single component; it’s considered on of the most energy-efficient and structurally sound building systems on the market.
Our panels are manufactured to the highest standards and are Code Compliant with Building Residential codes at the US Federal and California State levels for us as load bearing Walls, Roofs and Floors.
Structure
Thermal Isolation
Interior & Exterior Sheating
Electrical Conduits
Structural Insulated Panels
ResCom SIP’s are a revolutionary building system that consists of a solid core of expanded polystyrene (EPS) structurally laminated to 2 oriented strand board (OSB) skins.
The panels include framing, insulation, wire conduits, and sheathing in a single component; it’s considered on of the most energy-efficient and structurally sound building systems on the market.
Our panels are manufactured to the highest standards and are Code Compliant with Building Residential codes at the US Federal and California State levels for us as load bearing Walls, Roofs and Floors.
Structure
Thermal Isolation
Interior & Exterior Sheating
Electrical Conduits
SIP & Stick Frame
- Tight Envelope Continuous Insulation
- Environmentally Sustainable
- Framing costs are reduced by 18%-30%
- Engineering included
- Product Warranty Available
- Fixed Cost
- Zero onsite waste
- Thermal bridging and air cavities
- High carbon footprint
- The scheduled time to install the SIPs vs stick building is reduced by 60%-80%.
- Engineering costs $6-8K
- Floating material costs estimate
- Expensive change in order cost
- Continues cleanup and trash hauling
SIPs outperform stick framing in every category from strength to creative design options. They offer a higher R value and are 48% more energy efficient. Our SIPs are made with recyclable materials and can be recycled again if they’re not used for any reason.
Save up to 55% on labor costs by building with SIPs and provide 20% to 30% more structural strength while sending 30% less salvageable structural lumber to the landfill. Homes and commercial structures will also save up to 60% on utilities compared to stick-framed buildings.
The tightness of the construction improves air quality including humidity control, which makes your structure less prone to mold and dust mites. There’s no need to buy or install additional insulation. Save 30% on your framing labor and get your electricity installed up to 30% faster.
The large, pre-cut engineered panels create straighter walls that are plumb and square, with no bowed lumber, allowing our crew to complete work faster. Panels are pre-cut so there is no cutting or jobsite waste. Structures are framed faster, so subs can start sooner, and you have a continuous and sold nail base to fasten the drywall, cabinetry and siding. This streamlining means fewer wasted days, faster overall schedules, lower costs and less interest paid on your loans
The air quality in SIP structures is significantly better than stick-framed structures, requiring little to no air purification in most climates. No roof vent is required on low-slope roofing and the tighter installation means you can save up to 40% on HVAC system costs. With two layers of 5/8″ drywall on each side, your SIPs will achieve one-hour firewall protection as well.
ADVANTAGES
Advantages of Building with SIP Panels
Prefabricated panels can be deployed quickly, built in as little as one (1) day.
Faster Construction
Off-site fabrication results in accurate material and labor costs with no overages.
Material & Labor Savings
Low carbon construction and superior insulation results in up to 50% energy savings.
Sustainable & Energy Efficient
Remove the need for skilled carpentry.
Avoid Labor Shortages
All material and scrap from fabrication are reused for another project eliminating fabrication and job site waste.
Zero Waste Production
Increased Energy Efficiency reduces operating costs while increasing property valuation.
Increase Property Value
No VOC's, Healthy Interior Air Quality
Healthy Home
Our designs are minimalistic, modern, and flexible enough to customize to your own taste.
Customizable
Reduce energy consumption by up to 50% Healthier Indoor Environment.
Green Construction
Than traditional building methods.
65% Less Timber
Any waste from manufacturing is either reused or recycled.
90% Less Waste On-Site
No off-gassing or VOC's. No wall cavities for mold growth.
No Harmful Chemicals
Toward an Environment Certification and Crucial Tax Credits.
Earn LEED Points
Reduce the carbon footprint by over a million lbs over the lifetime of the building.
Low Carbon Footprint
ADVANTAGES
Advantages of Building with SIP Panels
Prefabricated panels can be deployed quickly, built in as little as one (1) day.
Faster Construction
Off-site fabrication results in accurate material and labor costs with no overages.
Material & Labor Savings
Low carbon construction and superior insulation results in up to 50% energy savings.
Sustainable & Energy Efficient
Remove the need for skilled carpentry.
Avoid Labor Shortages
All material and scrap from fabrication are reused for another project eliminating fabrication and job site waste.
Zero Waste Production
Increased Energy Efficiency reduces operating costs while increasing property valuation.
Increase Property Value
No VOC's, Healthy Interior Air Quality.
Healthy Home
Our designs are minimalistic, modern, and flexible enough to customize to your own taste.
Customizable
Reduce energy consumption by up to 50% Healthier Indoor Environment.
Green Construction
Than traditional building methods.
65% Less Timber
Any waste from manufacturing is either reused or recycled.
90% Less Waste On-Site
No off-gassing or VOC's. No wall cavities for mold growth.
No Harmful Chemicals
Toward an Environment Certification and Crucial Tax Credits.
Earn LEED Points
Reduce the carbon footprint by over a million lbs over the lifetime of the building.